Startup

1. Turn on the computer
2. Turn on the Laser (two switches on the left of the laser box)
3. Make sure the keys (shutters) on the laser box and the WLL are armed.
4. Turn on the Onkolab (switch on the socket strip on the shelf)
5. Start the LASX software (choose the hardware tree with or without the environment control)
6. Open the shutter at the front of the lamp-house on the shelf. If it is already on, switch it  off and on again.

Shutdown

1. Shutdown the LASX software
2. Copy the data to a file server or external hard-drive and delete the copy on the microscope computer
3. Close the shutter on the at the front of the lamp-house on the shelf
4. Turn of the Onkolab (switch on the socket strip on the shelf)
5. Turn off the laser (two switches on the left of the laser box)
6. Turn off the computer
7. Clean the objectives and the working surfaces